







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterQuartz & Granite Countertops in Concord, CA
Quartz and granite countertops in Concord typically run $4,200 to $9,500 installed for a standard kitchen, with most homeowners landing near $6,400 for 40 to 50 square feet of 3cm quartz with a simple edge and a single sink cutout. Granite trends slightly higher once you factor in slab selection and sealing, usually $4,800 to $11,000 for the same footprint. We quote the full installed price in writing before a template is taken, so the number you approve is the number you pay.
We treat countertops as one of the load-bearing decisions in a kitchen, not a finish item tacked onto the end. Slab layout, seam placement, cabinet flatness, and the dishwasher rough-in all have to be resolved before the fabricator’s saw touches stone. Get the order wrong and you’ll find out when the sink doesn’t center or when the overhang blocks the drawer bank. Our technicians have up to 22 years of experience setting cabinets and coordinating stone fabrication, and that experience mostly shows up in the measuring and sequencing, not the polishing.
This work sits inside our Kitchen Remodeling service, so if you’re planning counters alongside new cabinetry, backsplash, and lighting, we scope the whole thing under one written price. Call (866) 476-6447 and a live person picks up, day or night.

When You Need Quartz & Granite Countertops
Countertop replacement is usually triggered by something specific. These are the situations we walk into most often in Concord:
- Failed laminate or tile seams. Concord’s dry summers and wet winters work laminate and grout lines hard. Once water gets under a failing backsplash seam, the substrate (the particleboard or plywood underlayer beneath the counter) swells, and no surface repair holds.
- Burn marks or heat damage. A hot pan set down on laminate or solid surface leaves a permanent ring. Granite and quartz both handle ordinary kitchen heat better, though quartz still wants a trivet under a pan straight off the burner.
- Cabinet replacement pulling counters with it. New cabinets rarely match old counter dimensions. If the boxes move, the stone gets templated fresh.
- Sink or cooktop upgrades. An undermount sink requires the stone edge polished at the cutout. A new slide-in range or a switch to a gas cooktop changes the opening, and stone doesn’t stretch.
- Staining and etch marks on older stone. Some Concord homes have granite from the 1990s that was never resealed or was sealed once and forgotten. Etching on marble and dull spots on granite are common by year fifteen.
- Resale prep in the Clayton and Ygnacio Valley corridors. Buyers in this market read the kitchen first. Stone counters are one of the few upgrades that reliably show up in the appraisal conversation, and the cost is predictable enough to budget before listing.
Quartz and granite fail in different ways, and which one you need depends on how the surface is being used. Quartz is an engineered slab – ground stone bound in resin, non-porous, no sealing required. Granite is natural stone cut from a block, so every slab is unique, and it needs periodic sealing to resist stains. Both are legitimate choices; the wrong one is the one that fights how you actually cook.
Our Quartz & Granite Countertops Process
Five steps, in this order. Skipping any of them is how countertop jobs go sideways.
- On-site measure and cabinet check. We check that the cabinet boxes are level and flat within tolerance, because stone sits on the boxes and telegraphs every high spot. If the cabinet run needs shimming or a sagging box needs correction, we flag it before templating, not after.
- Written price and slab selection. You get the full installed price in writing – material, fabrication, edge profile, cutouts, tear-out, and disposal – before any work starts. Then we walk slab selection with you. Our documented material roster includes Cambria and Caesarstone engineered quartz along with Silestone, so every slab has manufacturer specs and a warranty behind it. We prefer to see the actual slab rather than a sample chip; veining and movement read very differently at full size.
- Digital template. Once cabinets are set and the sink and cooktop are on site, we template the exact opening, including the sink cutout, faucet holes, and any cooktop opening. Template comes after the plumbing rough-in (the supply and drain lines behind the wall) is finalized, because moving a faucet after the holes are drilled means a new slab.
- Fabrication and install. The fabricator cuts, edges, and polishes the slab. We coordinate delivery and set the stone, then handle the sink and faucet connections. Seam placement gets planned at template time and shown to you, so you know where it lands before it’s permanent.
- Backsplash, sealant, and close-out. Counter-to-wall joints get sealed, any backsplash tile goes in, and the site gets cleaned. You receive the signed 365-Day Done Right Promise in hand, along with the manufacturer documentation on the slab.
That fifth step matters more than it sounds. A squared-away close means a clean site, a documented scope, and a signed written guarantee in your hand – not a promise to send paperwork later. If the work fails inside twelve months, we come back and correct it at no charge.

Quartz & Granite Countertops Pricing in Concord
Here is the honest range. These are installed prices, not material-only, for a typical Concord kitchen of 40 to 50 square feet:
| Line item | Typical installed range |
|---|---|
| 2cm quartz, standard colors, eased edge | $4,200 – $6,800 |
| 3cm quartz, standard colors, eased edge | $5,200 – $8,400 |
| 3cm quartz, premium or book-matched slab | $7,500 – $12,000+ |
| Granite, entry-level slabs | $4,800 – $7,200 |
| Granite, mid-to-premium slabs | $7,000 – $11,000 |
| Edge upgrade (bullnose, ogee, mitered) | $300 – $1,100 |
| Undermount sink cutout and polish | $250 – $450 |
| Cooktop cutout | $150 – $350 |
| Tear-out and haul-away of old counters | $300 – $650 |
What moves the number: square footage first, then slab choice, then edge profile, then cutout count. A big island pushes you into a second slab, and that’s the single most common reason a Concord quote climbs. A waterfall edge (stone running down the side of the island to the floor) adds fabrication labor and usually requires a mitered seam. Backsplash is separate from counter pricing; a full-height slab backsplash runs considerably more than a 4-inch splash or tile.
We don’t give ballpark-over-the-phone numbers that move at the door. The written price you approve is the price, and it’s non-negotiable on our end in the sense that we hold to it. Estimates are free. Call (866) 476-6447 for yours and we’ll schedule the measure.
FAQs – Quartz & Granite Countertops
Is quartz or granite better for a Concord kitchen?
Quartz is the lower-maintenance pick and granite is the more distinctive one. Quartz is non-porous and never needs sealing, which suits households that don’t want an annual chore; granite is natural stone with one-of-a-kind movement and needs resealing roughly once a year to resist staining and etching. Our documented material roster includes both Cambria and Caesarstone engineered quartz and natural granite slabs, so you’re choosing based on how you cook, not on what’s available. Call (866) 476-6447 and we’ll walk through slab options with you.
How much do quartz countertops cost in Concord?
Quartz countertops in Concord typically run $4,200 to $8,400 installed for a standard kitchen, and $7,500 to $12,000+ once you move into premium or book-matched slabs. The biggest cost drivers are square footage, slab tier, edge profile, and how many cutouts you need. A second slab for a large island is the most common reason a quote climbs. Call (866) 476-6447 for a written, installed price – estimates are free.
Do I need to seal quartz countertops?
No – quartz never needs sealing. Engineered quartz is non-porous, so liquids sit on the surface rather than soaking in, and cleaning is soap, water, and a non-abrasive pad. Granite is the opposite: it’s porous natural stone and wants resealing about once a year, more often around a sink where water sits. We tell you which you’re getting at slab selection so there’s no surprise later. Call (866) 476-6447 with questions on material care.
How long does a countertop replacement take?
Most Concord countertop replacements take 2 to 4 weeks from template to install, with the install itself typically a single day. The timeline is set mostly by fabrication and slab lead time, not by the work on site. If your job involves cabinet changes or plumbing relocation, timeline stretches – and we build that into the written scope so you know what to expect. Call (866) 476-6447 to get a real schedule for your kitchen.
Why Bradford Remodeling Co Concord for Stone Countertops
We work to The Garrison Standard, which means a few things are fixed no matter the job. Every project gets a written price before work starts – always included, no exceptions. Every completed project carries the 365-Day Done Right Promise: if the work fails within a full year, we return and correct it at no charge. Technicians are background-checked and uniformed, with identity and conduct standards set at the Garrison Partners level, not left to individual job sites. And the phone is answered by a live person 24 hours a day, not a voicemail or a callback queue.
On materials, we work from a documented roster – Cambria and Caesarstone for quartz, Silestone as a third option – so specifications are traceable and quality isn’t left to guesswork. For the surrounding kitchen scope, we install KraftMaid and Wellborn cabinetry, and Kohler and Moen fixtures. That roster matters because when the cabinet run and the stone are spec’d together, the flatness check at template time actually means something.
If your project also touches the wider house, our general contracting and whole-home remodeling work runs under the same written-price and guarantee framework. Start at our home page to see the full scope.
Key Takeaways
- Installed quartz runs $4,200 to $8,400 for a standard Concord kitchen; granite runs $4,800 to $11,000 depending on slab tier.
- Quartz is non-porous and needs no sealing; granite is natural stone and needs annual resealing.
- Template comes after cabinets are set and plumbing rough-in is final – sequence matters more than slab choice.
- Every job gets a written price before work starts and the 365-Day Done Right Promise at close.
- Call (866) 476-6447 for a free estimate; a live person answers 24/7.
Countertops are a decision you live with for a decade or more, and the difference between a good job and a frustrating one is almost always in the measuring and the sequencing, not the stone. Call (866) 476-6447 for a free estimate. We’ll schedule the on-site measure, put the full installed price in writing before anything starts, and you’ll have the signed guarantee in hand at close. No numbers that move at the door, no voicemail between you and an answer.
Written by the team at Bradford Remodeling Co Concord, serving Concord.


