







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Showers & Shower Remodeling in Concord, CA
A walk-in shower remodel in Concord typically runs $6,500 to $16,000 for a full tear-out and rebuild, and most of that range is decided by the shower pan, tile, and valve work rather than the fixtures you see on the showroom wall. A walk-in shower (also called a curbless or low-threshold shower) replaces the tub-and-curtain setup with a tiled floor that drains without a step-over, sized for the way people actually move in a bathroom. We build them for Concord homeowners who want the job done to code, priced in writing before the first tile comes up, and backed by a written guarantee.
Most of Concord’s housing stock went up between the 1950s and 1980s, and the original shower pans in those homes are often at or past the end of their service life. A shower you step over today can become a shower you can’t get into safely in five years, especially in a split-level off Clayton Road where the upstairs bath is the only full bath in the house. Call us at (866) 476-6447 and a live person answers, day or night.
This work sits inside a larger bathroom remodeling scope, and we treat it that way. A shower rebuild touches waterproofing, plumbing rough-in, ventilation, and sometimes the floor joists. Doing it as a standalone patch job is how homeowners end up with a leak behind the wall six months later.
Key Takeaways
- Walk-in shower remodels in Concord run roughly $6,500 to $16,000, depending on pan type, tile, and valve work.
- Curbless showers in Concord require proper slope and waterproofing to meet code, not a tilted tile floor.
- We give you a written price before work starts and back completed work with the 365-Day Done Right Promise.
- Our technicians have up to 22 years of experience with tile, waterproofing, and plumbing rough-in.

When You Need Walk-In Showers & Shower Remodeling
Not every shower needs a full rebuild. Here’s what actually signals that it’s time, and what you can do about each one.
- You’re stepping over a tub you don’t use. A tub-to-shower conversion is one of the most common jobs we see in Concord, especially in homes built during the 1960s and 1970s where the hall bath still has the original cast-iron tub. Removing it opens floor space and gives you a shower that works for aging knees and knees that just don’t want to climb anymore.
- The grout is cracked and the pan is flexing. A shower floor that gives slightly underfoot or has grout lines that keep cracking after you regrout is telling you the pan or the substrate has failed. In Concord’s older homes, that’s often a sign the original pan was set on a bed that’s shifted. Patching the tile on top won’t fix what’s underneath.
- There’s a soft spot or discoloration near the curb. Water that gets past the shower curb or the door track reaches the framing behind the wall. By the time you see a stain on the ceiling below in a two-story Concord home, the damage has been traveling for a while. This is a rebuild, not a regrout.
- The shower is dark, cramped, or has no ventilation. Concord homes with interior bathrooms and no working exhaust fan grow mold on the ceiling and the grout within a season or two. A remodel that adds a properly sized fan and better lighting fixes the cause, not just the surface.
- You want a curbless entry for accessibility. A true zero-threshold or low-threshold shower is a design and waterproofing exercise. It needs the floor framed or recessed to accommodate slope, and it needs a linear drain in the right spot. If you’ve been quoted a “curbless” shower by tilting a standard pan, that’s a leak waiting to happen.
- The existing shower was done by someone in a hurry. We see showers in Concord where the tile was set directly on drywall, or where no waterproofing membrane was used at all. Those showers look fine for two or three years, then fail. If you’re buying a home or planning to stay, that’s worth opening up.
Our Walk-In Showers & Shower Remodeling Process
We run every shower remodel the same way, because the process is what keeps the price from moving and the job from dragging. Here’s the sequence, from the first call to the signed guarantee in your hand at close.
- Walk-through and written scope. We look at the existing shower, check the plumbing rough-in, and confirm what’s behind the wall. You get a written price for the agreed scope before any work starts. No numbers that move at the door. If we find something unexpected once the wall is open, you get a written change order to approve before we proceed.
- Demolition and inspection. Out comes the old tile, pan, and backer. This is where we check for rot, failed framing, or previous water damage. If the walls or floor need repair, we tell you and you approve it in writing before it’s fixed.
- Rough-in and waterproofing. The valve is set, the drain is positioned, and the substrate (the backer board behind the tile) goes in. Then the waterproofing membrane goes over it. This layer is what keeps water out of your framing, and it’s the part you never see but should never skip.
- Pan, tile, and trim. The shower floor gets built to the correct slope so water finds the drain instead of pooling. We set the tile, grout, and seal, and we use a documented brand roster for the materials, including Quikrete and Sakrete for the pan and setting work, so the product specs are traceable.
- Fixtures, glass, and final check. We install the fixtures, the glass or door, and the trim, then run the shower and check every joint, the drain, and the fan. You get a clean site and a signed written guarantee at close.
- The 365-Day Done Right Promise. Every completed shower carries a full-year written guarantee. If it fails inside that window (a leak, a failed seal, a tile that pops), we come back and correct it at no charge.
You can see how the shower work ties into the broader Bathroom Remodeling in Concord service if your shower is part of a bigger job.

Walk-In Showers & Shower Remodeling Pricing in Concord
Here are honest ranges for a walk-in shower remodel in Concord. These are real numbers, not a come-on to get someone to your door. Your actual price depends on the size of the shower, the materials you choose, and what we find behind the wall. All of it gets quoted in writing before we start.
| Item | Typical Range | What Drives the Price |
|---|---|---|
| Tub-to-shower conversion | $6,500 – $11,000 | Whether the tub is cast iron or steel, drain relocation, tile choice |
| Full walk-in shower rebuild (existing pan) | $7,000 – $13,000 | Waterproofing system, pan build, tile, glass |
| Curbless / zero-threshold build | $10,000 – $16,000 | Floor framing or recessing, linear drain, waterproofing detail |
| Tile and materials | $1,500 – $5,000 | Porcelain vs. natural stone, mosaic vs. large-format, amount of custom cutting |
| Valve and rough-in work | $500 – $1,800 | Whether the valve is inaccessible, whether the drain moves |
| Glass enclosure and door | $900 – $3,000 | Frameless vs. framed, custom-sizing, hardware |
Three things move a shower price in Concord more than people expect. First, what’s behind the wall. If a prior owner tiled directly over drywall, the rebuild has to fix that, and that’s a real cost. Second, the waterproofing method. A properly built pan and membrane cost more than a preformed plastic pan but last decades longer. Third, the drain type. A linear drain allows a lower threshold and a larger tile format, but it costs more to set correctly.
We don’t quote from a template. Every Concord home is different, and we tell you what your price covers in writing before work begins. That’s the plainest version of No-hassle upfront pricing we can offer.
FAQs – Walk-In Showers & Shower Remodeling
How much does a walk-in shower remodel cost in Concord, CA?
A walk-in shower remodel in Concord runs $6,500 to $16,000 depending on whether you’re converting a tub, rebuilding an existing shower, or building a true curbless shower. The biggest price swings come from what’s behind the wall, the waterproofing system, and your tile choice. Call (866) 476-6447 for an exact quote, written before any work starts.
Do I need a permit for a walk-in shower in Concord?
Yes, in most cases. Concord’s building code requires permits when plumbing is altered, when the valve or drain is relocated, or when a shower pan is rebuilt. A permit costs money and takes time, but it protects you at resale and ensures the work is inspected. We’ll walk you through what’s required at the walk-through so there are no surprises.
Can a walk-in shower be built curbless in an older Concord home?
Often, yes. A true curbless shower needs the floor recessed or framed to accommodate the drainage slope, or a linear drain positioned along one wall. In a Concord home from the 1950s or 1960s, that may mean opening the floor joists. We’ll check what’s possible during the walk-through and put the plan in writing before any demolition starts.
How long does a walk-in shower remodel take?
A standard walk-in shower takes two to four weeks, depending on scope and material availability. Curbless and custom builds run closer to four weeks. We give you a written schedule at the start and don’t leave the job to chase another project. The 365-Day Done Right Promise starts the day the job closes.
Bradford Remodeling Co Concord is part of the Garrison Partners family and operates as an independently owned and operated business held to The Garrison Standard. That means a written price before work starts, background-checked, uniformed technicians on every job, and a live person answering the phone 24/7, not a voicemail queue. If a shower you had us build isn’t right, we come back and make it right. Call (866) 476-6447 for a free estimate, and we’ll put a written number in front of you before anything moves.
Written by the team at Bradford Remodeling Co Concord, serving Concord.


