







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Concord Homeowners Choose Toto Construction
We provide independent Toto construction and service in Concord, CA – toilets, faucets, fixtures, Washlets, and Neorest units – backed by a written price before any work starts and the 365-Day Done Right Promise on every completed job. We are not affiliated with, authorized by, or endorsed by Toto. We’re an independent service provider, and we say so plainly so there’s no confusion about who stands behind the work. What separates our Toto work is diagnosis: our technicians have up to 22 years of experience with the specific failure modes these fixtures develop in Concord’s housing stock, not a generic repair checklist. Call (866) 476-6447 for a free estimate.
Why Trust Bradford Remodeling Co Concord for Your Toto Construction?

Toto makes precision fixtures, and precision fixtures punish guesswork. Our technicians have up to 22 years of experience tearing into Drake, Eco Ultramax, Washlet, and Neorest units, which means they recognize a failed flush tower seal by the sound of a phantom flush before the tank comes off. That familiarity matters on Toto because the tolerances are tighter than on commodity toilets – a fill valve seated a fraction off spec will run intermittently for weeks before the homeowner notices the water bill.
We source OEM-compatible parts for Toto repairs. A genuine Toto fill valve costs more than the generic box-store alternative, but it seats correctly and lasts. We don’t substitute a cheap part and hope. Every job gets a written price before tools come out, non-negotiable and non-moving, per The Garrison Standard. Every completed job carries a full-year written guarantee: if the work fails inside that window, we come back and correct it at no charge. And a live person answers the phone 24/7 – not a queue, not a voicemail. If your Neorest throws a sensor error at an inconvenient hour, you reach a human who can talk you through it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Concord
Concord’s postwar ranch homes drive a specific pattern of Toto failures. Original plumbing rough-ins from the 1940s through the 1970s, mineral-heavy inland East Bay water, and additions layered onto mid-century shells all stress these fixtures differently than a new build would. Here’s what we see most:
- Fill valve wear on Drake and Eco Ultramax toilets. The fill valve is the component that refills the tank after a flush. Over years of Concord’s harder water, mineral deposits stiffen the valve seat and the tank refills slowly – or never fully closes, so the toilet runs continuously. It’s the single most common Toto issue we’re called for.
- Flush tower seal failure causing phantom flushing. The flush tower is Toto’s flush valve assembly. Its rubber seal flattens with age, water seeps into the bowl, and the fill valve kicks on to replace it every few minutes. Homeowners hear a toilet that runs at random and assume a leak somewhere else. It’s almost always the tower seal.
- Washlet bidet seat nozzle clogging and weak spray. Washlet nozzles draw water directly, and scale from Concord’s supply builds up on the nozzle apertures. Spray goes uneven, one side softer than the other, or weaker than it used to be. Left long enough, the control panel can stop responding to inputs too. Cleaning helps; sometimes components need replacing.
- Neorest sensor and electronic flush malfunction. Neorest units are integrated smart toilets, and their sensors and electronic flush mechanisms don’t fail the way a mechanical toilet does. A door sensor that ignores an approach or a flush cycle that triggers on its own usually calls for a diagnostic reset first, then component replacement if the reset doesn’t hold.
- Tank-to-bowl gasket leaks on aging installs. These aren’t Toto-specific, but on Concord ranches with decades-old installations, a gasket that was fine for a decade will start weeping once a home’s plumbing pressure shifts. Worth checking any time you’re already inside the tank.
Toto Parts & Our Repair-vs-Replace Approach

On Toto, we default to OEM – genuine Toto fill valves, flush towers, and seals – because fit and performance are reliable and the part will hold up the way Toto intended it to. Aftermarket parts can work fine for older models, but they may not last as long, and we tell you when that’s the honest call instead of quietly using them. We don’t claim to stock Toto parts locally; we source the right part for the specific model and job, and price the job in writing before any of that begins.
Repair is usually the right answer on Toto fixtures. These are well-made toilets and the failure point is almost always a wearable component, not the fixture itself. Replace only when the bowl or tank is cracked – that’s structural – or when the repair cost approaches a new fixture. We’ll give you the number either way and let you decide.
If your Toto is misbehaving, call (866) 476-6447 for a free estimate on the repair.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact model – Drake, Drake II, Eco Ultramax, Washlet series, Neorest – then trace the symptom to its component. A running Drake is a fill valve or a tower seal; a weak Washlet spray is nozzle scale or supply pressure. We rule out what it isn’t before quoting.
- 2
Written price before work. You get a clear, itemized price on the specific parts and labor before any tool comes out. No numbers that move at the door.
- 3
Repair or install with OEM parts. The faulty component comes out and the OEM replacement goes in. On installs of related bath fixtures – walk-in showers, vanities, tile and flooring – the same disciplined approach applies to the rough-in and finish.
- 4
Test and verify. We flush, check for phantom cycling, confirm the fill valve closes cleanly, and test every Neorest sensor and Washlet function before we pack up.
- 5
365-Day Done Right Promise. Every completed job carries the full-year written guarantee. If the repair doesn’t hold inside that window, we return and correct it at no charge. You leave with the guarantee in hand.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Concord

We work on the full Toto range Concord homeowners actually own:
- Toto Drake and Drake II – high-efficiency two-piece toilets, the most common Toto model we see in Concord. Fill valve and flush tower service is routine.
- Toto Eco Ultramax – one-piece high-efficiency toilets. Same fill valve wear pattern as the Drake, with a one-piece body that makes tank access a little different.
- Toto Washlet – the bidet seat series. Nozzle cleaning, spray pressure diagnosis, and control panel repair.
- Toto Neorest – integrated smart toilets. Sensor diagnostics, electronic flush troubleshooting, and component replacement.
When a Toto install sits inside a broader bath project, we handle walk-in shower installation, bathroom vanity installation, and tile and flooring on the same written scope, so nothing gets coordinated between two contractors who never talk.
We Also Service These Brands
Bradford Remodeling Co Concord isn’t a single-brand shop. Alongside Toto, we install and service KraftMaid and Wellborn cabinetry, Kohler and Moen fixtures, and Cambria, Silestone, and Caesarstone surfaces – all documented brands with manufacturer specs and warranties that back our own guarantee. That matters when a bath or kitchen project touches more than one trade. One written price, one crew standard, one guarantee across the whole scope.
FAQs – Toto Construction Service in Concord
A worn fill valve or a flush tower seal that no longer seats properly. The fill valve is the component that refills the tank; when mineral deposits stiffen its seat, it doesn’t close cleanly and the tank runs continuously. A flattened tower seal causes the same symptom plus phantom flushing. The typical fix is to shut off the water, drain the tank, and replace the faulty component with an OEM part – often a straightforward job for a qualified local pro. Call (866) 476-6447 to schedule a free estimate.
Yes, an aftermarket fill valve can work, but it may not last as long as a genuine Toto part. On the Eco Ultramax specifically, fit and seating tolerance are tight enough that an aftermarket valve that seems to fit can develop intermittent running within a year. We default to OEM for that reason. Call (866) 476-6447 for a free estimate and we’ll price both options in writing.
Clogged nozzles from mineral scale, or a drop in supply pressure. Concord’s water carries enough minerals that Washlet nozzle apertures build scale over time, and the spray goes uneven or weaker on one side. Cleaning the nozzles often restores it; if scale has hardened or the control panel isn’t responding, components may need replacing. Call (866) 476-6447 to schedule service – estimates are free.
Repair is usually worth it. Neorest failures are typically sensor or electronic flush component issues, and a diagnostic reset or a single component replacement brings the unit back to full function at a fraction of the cost of a new smart toilet. Replacement only makes sense when the bowl is cracked or the repair cost approaches a new fixture. Call (866) 476-6447 and we’ll give you a written number before you decide.
Yes, in older Concord ranch homes especially. Many were built from the 1940s through the 1970s with minimal original insulation and plumbing rough-ins sized for the era, and opening a wall can reveal knob-and-tube or early Romex wiring and older supply lines. That affects rough-in distance, floor flange condition, and water supply pressure at the fixture. We check those before install so the Toto goes in right the first time rather than leaking at the base in six months. Call (866) 476-6447 for a free estimate.
Using genuine Toto parts and correct installation practice does not void your manufacturer warranty. This is where aftermarket parts create real risk – a non-OEM component that fails can complicate a warranty claim. We use OEM parts on Toto service for exactly that reason. As an independent provider, we’re not authorized by Toto and don’t represent the manufacturer, but we work in a warranty-safe way. Call (866) 476-6447 with your model and we’ll talk through it.
Toto toilet repairs – fill valve or flush tower replacement – typically run a modest fraction of what a full bath project costs, and the exact price depends on the model and part. When a Toto installation sits inside a broader bath remodel, here are the market ranges we work from in Concord:
| Service | Price Range in Concord |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every one of those gets a written price before work starts, and every completed job carries the 365-Day Done Right Promise. Call (866) 476-6447 for an exact quote – estimates are free.
Book Your Toto Service in Concord, CA
Whether it’s a running Drake, a weak Washlet spray, or a Neorest that won’t cycle, we diagnose it, price it in writing, and back the work with the 365-Day Done Right Promise. Call Bradford Remodeling Co Concord at (866) 476-6447 to book your free estimate. A live person answers, day or night.
Written by the team at Bradford Remodeling Co Concord.












