







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Concord Homeowners Choose Kohler Construction
We provide independent Kohler construction, repair and installation service in Concord, CA, for homeowners who own Kohler fixtures and want them fixed or installed correctly by a crew that works with the brand every week. Our technicians have up to 22 years of experience and bring OEM-compatible parts, tested methods and a written price before any work starts. We are an independent provider, not Kohler-authorized; Kohler does not sponsor, endorse or warranty our work. Call (866) 476-6447 for a free estimate.
Why Trust Bradford Remodeling Co Concord for Your Kohler Construction?

Kohler fixtures aren’t generic plumbing. Every model carries its own geometry, valve design and specification sheet, and getting it right depends on knowing that sheet. Our technicians have up to 22 years of experience and know how a Memoirs comfort-height bowl sits on its flange, how the fill valve on a Villager or Highline tank behaves once Concord’s hard water has scaled the seat, and how an Underscore acrylic tub’s overflow gasket ages. That hands-on familiarity matters when a repair has to hold and an install has to match manufacturer specs.
When we source parts, we work from Kohler’s own OEM fills, flush valves, trip levers, drains and overflow gaskets wherever the fit is dimensional or the design is proprietary. Quality aftermarket cross-references (Fluidmaster-class internals, for example) go in only where the fit is a true match. That approach protects the fixture’s finish, avoids repeat leaks, and stays within warranty-safe practice so the Kohler coverage on the piece isn’t voided by the work. We source per job; parts aren’t held locally, so the right part is ordered to the specific model.
Everything runs on The Garrison Standard. You get a written price before a tool comes out, background-checked technicians on the job, and our 365-Day Done Right Promise behind completed work for a full year. That’s what “squared away” means here.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Concord
Concord’s housing stock is mainly postwar 1940s-1970s ranch and tract homes, and most of the Kohler work we see here is retrofit on those aging shells rather than new build. The fixtures and the fixes below are what actually come up.
- Fill and flush valve failure on Villager and Highline two-piece toilets. The tank internals (Fluidmaster-style 526/528-class on many units) degrade in Concord’s hard water, leaving mineral scale on the valve seat. That shows up as phantom running, a weak flush, or short-cycling where the toilet refills in bursts. A fill valve, flapper and supply line replacement plus a tank and rim scrub usually clears it.
- Wax ring and flange seal failures under Memoirs and Highline bowls. On slab and raised-foundation floors, an old wax ring or a damaged closet flange lets water seep slowly at the base. You may see discoloration at the caulk line or softness in the subfloor before you see standing water. The fix is pulling the toilet, inspecting the flange and subfloor, resetting on a new wax ring, and checking for soft flooring before reinstall.
- Alcove tub apron and overflow-gasket leaks on Archer and Underscore acrylic tubs. The overflow seal and drain shoe loosen over time, and a slow leak runs under the tub and stains the ceiling below. Re-sealing or replacing those parts (an overflow gasket and drain shoe) resolves it before surround work begins.
- Choreograph and Sterling shower wall panel seams. When the original adhesive or sealant at a panel seam fails, moisture wicks behind the panel. That reads as dark staining or soft backerboard near the joint. The cure is stripping and resealing the seam, or replacing the affected panel if the backer is already wet.
- Comfort-height install issues on Memoirs Stately. A comfort-height bowl rides higher on the flange and can put extra strain on old supply lines and shutoffs if the rough-in isn’t checked first. On a Concord ranch bath, the rough-in and shutoff are verified before the new fixture goes down, not after.
Here’s how a typical Kohler toilet job usually goes in Concord. A Memoirs or Highline that runs intermittently or won’t hold a full flush traces to a worn fill valve or flapper plus mineral buildup on the valve seat; the standard fix is a new fill valve, flapper and supply line, with a tank and rim scrub to clear hard-water scale. When water appears at the base of the bowl instead, the wax ring or closet flange has failed, so a qualified pro pulls the toilet, inspects the flange and subfloor, resets it on a new wax ring, and checks for soft flooring before reinstalling. On an Archer or Underscore tub, a ceiling stain below usually means the overflow gasket or drain shoe has loosened; the fix is re-sealing or replacing those parts before any tile or surround work.
Kohler Parts & Our Repair-vs-Replace Approach

We match the part to the model, not the other way around. Kohler OEM fill valves, flush valves, trip levers, bath drains and overflow gaskets go in where the part is proprietary or the fit is dimensional. Quality aftermarket internals like Fluidmaster-class assemblies go in only where they’re a true cross-reference. Cheap knockoff cartridges and no-name drain shoes are the usual source of repeat leaks, and we don’t fit them. On a Memoirs, Villager or Highline toilet where the shell and finish are sound, repair is the right call. On an Archer or Underscore acrylic tub with a good shell, repairing seals and drain parts is usually cheaper and cleaner than a swap.
Replace outright when a cast iron tub has lost its enamel, or when a Choreograph or Sterling wall system’s backer is already wet. An honest assessment up front, in writing, saves you money later.
Call (866) 476-6447 for a free estimate; you’ll get a written repair-or-replace recommendation before any work starts.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We read the symptom against the model. Running toilet, base seepage, ceiling stain below a tub, or a soft wall seam each point to a specific Kohler component, so we confirm which one is actually failing before quoting.
- 2
Written price before work. You get the scope and the number in writing, per The Garrison Standard. Kohler-specific parts and any rough-in corrections are itemized so nothing moves at the door.
- 3
Repair or install. We source the OEM or correctly cross-referenced part for the exact model and series, fit it to spec, and correct rough-in, flange or backer issues found along the way (common in Concord’s older baths).
- 4
Test and verify. Flush cycle, fill level, drain seal and shower-wall seams get tested under real conditions, not just a quick look.
- 5
365-Day Done Right Promise. Completed work carries a full-year written guarantee. If the repair or install fails inside that window, we come back and correct it at no charge.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Concord
We work across Kohler’s core bath and toilet lines: Memoirs and Memoirs Stately comfort-height toilets; Villager and Highline two-piece toilets; Archer and Underscore alcove and apron-front baths; and Choreograph and Sterling (Kohler-owned) shower wall systems. On the installation side, that covers the Kohler sub-services many Concord homeowners ask about – bathroom remodeling, walk-in shower installation and tub-to-shower conversion – where a new Kohler tub, shower wall system or vanity goes in as part of a larger bath project. Parts are sourced to the specific model and series per job; we don’t claim to hold Kohler inventory locally.
We Also Service These Brands
Bradford Remodeling Co Concord isn’t tied to one manufacturer. Alongside Kohler, we work with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Toto and Moen fixtures, among other documented name brands. That means a Concord bath or kitchen can be specified across brands with traceable specs and manufacturer warranties backing our own 365-Day Done Right Promise – one contractor, one written scope, one standard.
FAQs – Kohler Construction Service in Concord

Is Bradford Remodeling Co Concord authorized by Kohler?
No. We are an independent Kohler service provider, not a Kohler-authorized dealer, and Kohler does not sponsor, endorse or warranty our work. What we do bring is technicians with up to 22 years of experience who work on Kohler fixtures routinely and use OEM or correctly cross-referenced parts, backed by our own 365-Day Done Right Promise.
Do you use genuine Kohler/OEM parts?
Yes, wherever the part is proprietary or the fit is dimensional: Kohler OEM fill valves, flush valves, trip levers, bath drains and overflow gaskets. Quality aftermarket internals (Fluidmaster-class) go in only where they’re a true cross-reference. We don’t fit cheap knockoffs. Parts are ordered to your specific model and series. Call (866) 476-6447 with your model and we’ll confirm the right part.
How long does Kohler service take?
Most Kohler toilet internals swaps (fill valve, flapper, supply line) are done in a single visit. A wax ring or flange reset takes longer because the toilet is pulled and the subfloor inspected. An Archer or Underscore overflow or drain-shoe reseal is a short job, but a Choreograph or Sterling wall panel replacement depends on whether the backer is wet. We give you a written timeline before work starts, and the 365-Day Done Right Promise covers the result for a full year.
What Kohler models/series do you cover?
Memoirs and Memoirs Stately comfort-height toilets, Villager and Highline two-piece toilets, Archer and Underscore alcove and apron-front baths, and Choreograph and Sterling shower wall systems. We also handle Kohler vanity installs as part of a bath remodel. Call (866) 476-6447 to confirm your model.
Will service void my Kohler warranty?
Correctly done service won’t void your Kohler warranty, and that’s why we fit OEM or properly cross-referenced parts and follow manufacturer specs. Poor workmanship and wrong parts are what cause warranty trouble, not service itself. We describe what we’ll do and why before we start, so there are no surprises. Call (866) 476-6447 for an exact quote – estimates are free.
How much does Kohler construction cost in Concord?
Cost depends on the sub-service. A single Kohler toilet repair is a small line item; a bathroom remodel with new Kohler fixtures, walk-in shower or tub-to-shower conversion runs higher. Here are the Concord ranges:
| Service | Price Range (Concord) |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
You get a written price before any work starts – no numbers that move at the door. Call (866) 476-6447 for an exact quote – estimates are free.
Book Your Kohler Service in Concord, CA
Ready to fix that running Kohler Highline, reseal an Underscore tub, or plan a walk-in shower install in your Concord home? Call Bradford Remodeling Co Concord at (866) 476-6447 for a free estimate. You’ll get a written price, background-checked technicians on the job, and our 365-Day Done Right Promise behind the work.
Written by the team at Bradford Remodeling Co.












