A Bradford company - serving Concord, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
KraftMaid · Concord

KraftMaid Construction Service in Concord, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Concord
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A small remodeled galley kitchen with cabinets to the ceiling
A walk-in pantry with wood shelving
A wide opening with a new beam where the kitchen wall was removed
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled primary suite with built-in wardrobes and a window seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Concord Homeowners Choose KraftMaid Construction

Bradford Remodeling Co Concord provides independent KraftMaid construction service in Concord, CA: cabinet installation, refacing, repair, and full kitchen remodeling using KraftMaid Vantage, Keyline, Deluxe, and Momentum cabinetry. We’re an independent service provider, not a KraftMaid dealer or factory-authorized agent, and our work is not authorized, sponsored, or endorsed by KraftMaid. What sets our KraftMaid work apart is diagnosis first. We open the box, read the build, and tell you whether the cabinet is worth saving before we quote a single door. Every KraftMaid project here starts with a written price and finishes under the 365-Day Done Right Promise. Call (866) 476-6447 to schedule a free estimate.

Call (866) 476-6447

Why Trust Bradford Remodeling Co Concord for Your KraftMaid Construction?

Installers leveling a new base cabinet during a kitchen remodel

KraftMaid builds four distinct cabinet lines, and each one carries its own materials, joinery, and finish system. A Vantage door is not a Deluxe door, and treating them the same is how homeowners end up with a mismatched kitchen. Our technicians have up to 22 years of experience and have worked across all four KraftMaid series in Concord’s housing stock, so we can read the build date, the box construction, and the hinge pattern before we recommend a single replacement part.

We keep a documented roster of name-brand materials, KraftMaid included, so specifications on every job are traceable to a manufacturer spec sheet and a manufacturer warranty. When we order OEM replacement doors and fronts, we match the finish and profile against the original KraftMaid code, not against a color chip that looks close. When OEM parts are backordered, we use quality aftermarket soft-close hinges and slides and tell you plainly which parts are which on the written quote.

Every completed project carries the 365-Day Done Right Promise. If a door warps again inside that window, or a drawer slide fails, we come back and correct it at no charge. A live person answers the phone 24 hours a day, 7 days a week, and every technician who walks through your door is background-checked and uniformed. That’s the framework we run KraftMaid work on in Concord.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common KraftMaid Construction Problems We Fix in Concord

Concord’s inland East Bay climate is hard on cabinetry. Summers regularly push past 100°F, and the seasonal humidity swing that follows works wood and finish back and forth until something gives. Here’s what we see most often on KraftMaid cabinets in Concord homes:

  • Door warping and delamination on Vantage and Keyline series. The door panel bows and the finish cracks at the frame joints after repeated heat and humidity cycles. It shows up first on cabinets beside a south- or west-facing window, where afternoon sun hits the face directly. Once the substrate swells, the panel won’t flatten again on its own.
  • Drawer box joint separation and slide failure on Momentum series. Repeated heavy loading – cast iron, stacked cans, a drawer used as a step stool more than once – separates the box joints and wears the slide out. The drawer starts to sag, then catches. Replacing the slide alone won’t hold if the box has already racked.
  • Finish peeling and cracking around sink bases and dishwasher openings. Standing moisture and steam attack the edges and the toe-kick first, then the panel face. The cause is usually a finish edge that was never sealed against the moisture that collects under a sink and vents out of a dishwasher.
  • Soft-close hinge wear and misalignment on Deluxe series. After years of daily use, the damper loses tension and the door drifts out of alignment against the frame. Hinges wear faster on cabinet doors that get opened a dozen times a day, like the one under the coffee station.
  • Box failures on 1950s ranch installs. Plenty of Concord ranches were built before KraftMaid existed, so KraftMaid cabinets in these homes went in over furring strips or an uneven wall. When the wall shifts, the boxes rack and the doors stop sitting square. This one gets blamed on the cabinet when the wall is the actual problem.

KraftMaid Parts & Our Repair-vs-Replace Approach

A home office with a built-in desk and shelves

For KraftMaid cabinetry, OEM replacement doors, drawer fronts, and hardware are usually the best fit because they match the original finish and profile exactly. That matters most on Vantage and Keyline, where the door style and edge profile have to line up with the rest of the run. When OEM parts are backordered and the homeowner can’t wait, a quality aftermarket soft-close hinge or slide is a sound upgrade, provided we document it on the quote so you know what’s OEM and what isn’t.

We don’t stock KraftMaid parts locally. Every door, front, hinge, and slide is sourced per job against your specific series and finish code, which is why we need the model information before we can give you a firm number. We’re direct about repair versus replacement. If the cabinet boxes are solid, refacing or replacing just the affected doors and fronts is usually smarter and cheaper than a full tear-out. If the boxes have swelled, separated, or pulled away from the wall, no amount of new door will fix it. Call (866) 476-6447 and we’ll tell you which side of that line your kitchen is on.

Our KraftMaid Service Process – Step by Step

  1. 1
    Diagnosis. We inspect every KraftMaid cabinet in the run – box condition, joint integrity, hinge and slide wear, moisture staining near the sink and dishwasher – and record the series and finish code for each. You get a written assessment before any work is priced.
  2. 2
    Written scope and price. You get a line-item quote in writing: which doors and fronts are being replaced, which are OEM and which are aftermarket, what’s being refaced, and what the total is. The price doesn’t move once work starts.
  3. 3
    Repair or install. Background-checked, uniformed technicians remove the failed doors and fronts, correct any wall or furring issue behind the box, install the replacement parts, and seal new finish edges against moisture. If the job is a full KraftMaid install, this is where the boxes go in and get shimmed square.
  4. 4
    Test and adjust. Every door and drawer gets opened and closed in front of you. Hinges get aligned, soft-close dampers get checked, and slides get loaded before we call it done.
  5. 5
    Warranty and close-out. Clean site, documented scope, and your signed 365-Day Done Right Promise in hand. If the KraftMaid work fails inside that year, we come back and fix it at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

KraftMaid Products We Service & Install in Concord

We service and install across the full KraftMaid product line: Vantage, Keyline, Deluxe, and Momentum cabinetry, along with the door styles, drawer boxes, hinges, slides, and finish systems that go with each series. That covers cabinet installation and refacing, full kitchen remodeling, and kitchen design and layout for homeowners building a new run around existing KraftMaid boxes. Whether you’re adding cabinets to a 1960s Concord ranch kitchen or replacing a failed door run in a Todos Santos-area home, we handle the same way: diagnosis, documentation, written price, done.

We Also Service These Brands

Bradford Remodeling Co Concord works across a documented roster of premium brands, not just KraftMaid. We also service Kohler fixtures, Cambria and Silestone surfaces, and Toto bath products on Concord remodels. That matters when your kitchen or bath project touches cabinetry, countertop, and plumbing together – one contractor, one written scope, one guarantee covering the whole job instead of three trades pointing at each other.

FAQs – KraftMaid Construction Service in Concord

A wood double vanity with two mirrors after a bathroom remodel

Service Price Range in Concord
Cabinet Installation $4,000 – $13,000
Full Kitchen Remodeling $14,000 – $45,000
Small Kitchen Remodel $9,000 – $20,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500
Kitchen Island Installation $3,000 – $10,000

Every one of those numbers gets confirmed in a written quote before work starts. Call (866) 476-6447 for an exact price – estimates are free.

Book Your KraftMaid Service in Concord, CA

If your KraftMaid cabinets need a door replaced, a slide fixed, or a full kitchen refaced on solid boxes, we’ll give you a written price and tell you straight whether repair or replacement is the right call. Our technicians have up to 22 years of experience with the full KraftMaid line, and every job is covered by the 365-Day Done Right Promise. Call (866) 476-6447 to schedule your free estimate in Concord.

Written by the team at Bradford Remodeling Co Concord.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A single-story rear room addition with tall windows and a new patioA freestanding soaking tub in a remodeled primary bathroomA whole-home remodel with the living, dining and kitchen areas opened upA low-threshold walk-in shower with a bench and grab barA finished basement family room with a media wall and wet barA powder room with botanical wallpaper and a stone sink

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Concord

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Concord team

A local vetted partner works across Concord and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 476-6447
Local Service Coverage

Request a Free Estimate in Concord

Tell us what you need - Bradford Remodeling Co Concord responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch