







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Concord, CA
Vanities, tile, and fixtures are the three surfaces a bathroom gets judged by every single day: the cabinet you stand in front of, the floor and walls you look at, and the faucet, shower trim, and toilet you touch. Replacing them is the highest-visibility work in a bathroom remodel, and it’s the work most often done badly, because tile only looks easy until the substrate underneath it starts to move. Bradford Remodeling Co Concord installs vanities, tile, and fixtures with a written price before any work starts and a written guarantee when the job closes. Call (866) 476-6447 and a live person answers, any hour.
This is a sub-service of our Bathroom Remodeling in Concord work, which means we handle it as a system rather than three separate errands. Our technicians have up to 22 years of experience, and material specifications tie back to a documented roster of name-brand products, so when a Kohler faucet or a Cambria top is written on the scope, that’s what gets installed.

Key Takeaways
- A vanity, tile, and fixture swap in Concord typically runs $6,400 to $19,500 depending on tile selection, vanity size, and how much rough-in work the walls and floor demand.
- Tile failure in Concord usually starts underneath the tile, not on top of it. Substrate prep and waterproofing are where the money actually goes.
- Every project gets a written price before tools come out and a full-year written guarantee (the 365-Day Done Right Promise) when it’s finished.
- We install documented brands with manufacturer specs behind them: KraftMaid and Wellborn vanities, Kohler and Moen fixtures, Cambria and Caesarstone tops.
When You Need Vanities, Tile & Fixtures
Most homeowners in Concord call us about one visible problem and end up fixing the underlying one too. These are the scenarios we see most often, and what each one usually means.
- Grout lines that keep cracking or turning dark. In Concord’s older ranch and mid-century homes, we routinely find tile set directly on drywall or on a single layer of plywood with no uncoupling membrane. Grout cracks because the floor is flexing, not because the grout was mixed wrong. Re-grouting buys you months, not years.
- A vanity that’s swollen at the base or soft around the sink. Particleboard cabinet boxes fail fast once a supply line weeps. If the toe kick is crumbling, the cabinet is done and a top-only replacement just hides the problem.
- Builder-grade fixtures from the original build. A lot of Concord housing stock still runs two-handle chrome faucets and low-flow showerheads from the 1980s and 1990s. Cartridges seize, handles strip, and replacement parts get harder to source each year.
- Tile you want gone for style reasons, not failure. Pink or harvest-gold 4-inch squares, or a tub surround that dates the whole room. This is the cleanest category of work because the substrate is often still sound.
- A shower that pools water or smells musty. Poor slope at the drain and missing waterproofing behind the surround are common. Musty smell after a shower usually means moisture is trapped in the wall cavity.
- Preparing to sell and needing the bathroom to photograph well. New tile, a clean vanity, and matched fixtures change how a listing reads in photos more than almost any other dollar you can spend.

Our Vanities, Tile & Fixtures Process
We run the same sequence on every job in Concord, whether it’s a powder room off Clayton Road or a hall bath in the Dana Estates area. The order matters, and skipping a step is how tile jobs fail.
- Walkthrough and written scope. We measure the room, photograph the existing conditions, and identify what’s staying versus going. You get a written price before any work starts. No numbers that move at the door.
- Material selections with documented specs. You choose the vanity (KraftMaid and Wellborn cabinetry are both on our roster), the counter, the tile, and the fixtures. Brand and model go on paper so the specification is traceable and nothing is left to guesswork.
- Demo and inspection of what’s underneath. Tile comes out, the vanity comes out, and we open up around the rough-in. This is where we find the surprises: rot at the subfloor, a drain line that was never sloped right, or drywall behind the tub surround where cement board belongs.
- Substrate and waterproofing. Cement board or a foam tile backer, a proper uncoupling membrane on floors, and a liquid-applied or sheet waterproofing system in wet areas. This step is invisible when the job is done and it’s the entire reason a tile floor lasts.
- Install: tile, vanity, counter, fixtures. Tile set with correct thinset and consistent grout joints, vanity leveled and shimmed to the floor, counter templated and set, then Kohler or Moen fixtures installed and tested. We run water and check for drips before we call it done.
- Squared-away close. Clean site, debris hauled away, documented scope signed off, and your full-year written guarantee in hand. If the work fails inside that window, we come back and correct it at no charge.
Vanities, Tile & Fixtures Pricing in Concord
Here’s the honest range. Actual numbers depend on room size, tile selection, and how much of the hidden work the walls and floor require once we open them up.
| Line item | Typical installed range | What drives the number |
|---|---|---|
| Single vanity (cabinet + top + sink) | $1,400 – $4,800 | KraftMaid vs. stock cabinetry, quartz vs. granite top, single vs. double bowl |
| Double vanity (cabinet + top + sinks) | $2,800 – $7,200 | Width, drawer configuration, counter material |
| Floor tile, installed | $9 – $22 per sq ft | Tile type, pattern complexity, substrate repair |
| Shower or tub surround tile | $2,200 – $6,500 | Waterproofing system, tile size, niche and bench work |
| Faucet, shower trim, and drain | $450 – $1,600 | Kohler or Moen line, finish, thermostatic vs. standard valve |
| Toilet replacement | $380 – $900 | Model, flange condition, floor repair |
| Full sub-service turnkey (typical hall bath) | $6,400 – $19,500 | Everything above plus rough-in corrections |
Two things push a Concord job toward the top of those ranges. First, older homes frequently have a subfloor that’s under-strength for tile, which means adding a layer of plywood or switching to a tile that tolerates deflection. Second, moving a drain or supply line so a bigger vanity fits means opening the wall, and that’s a real cost even when it’s the right call.
We quote in writing and we quote before work begins. If the walls open up and we find something nobody could see, you hear about it before we spend a dollar on it. Free estimates, no pressure to sign anything on the spot. Call (866) 476-6447 for yours.
Why Bradford Remodeling Co Concord for Tile and Fixture Work
Bradford Remodeling is a member of the Garrison Partners family, established in 2004 and held to The Garrison Standard: every price and every guarantee in writing before a single tool comes out. That framework is why we don’t give verbal ballparks or adjust a number at the door. It’s also why the people who show up at your house are background-checked and uniformed, with identity and conduct standards set at the Garrison Partners level rather than left to an individual job site.
The 365-Day Done Right Promise covers every completed project for a full year. If the tile debonds, a grout joint opens, a fixture leaks, or a vanity settles, we return and correct it at no charge inside that window. That’s the whole guarantee, stated plainly, and it’s in your hand before we leave.
On materials, we work with a documented roster rather than whatever’s on sale that week: KraftMaid and Wellborn cabinetry, Cambria and Caesarstone surfaces, Kohler and Moen fixtures, and setting materials from established manufacturers like Quikrete and Sakrete. Documented specs matter because manufacturer warranties are what back our own guarantee on the materials side.
A note on scope for homeowners who are also thinking bigger: if the bathroom work is part of a larger project, our home remodeling team can coordinate the sequence so you’re not managing two contractors. And for anyone comparing options across the East Bay, our Bathroom Remodeling in Concord page covers full-room scope, layout changes, and what a complete gut remodel runs.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity and tile install cost in Concord?
A typical Concord hall bath with a single vanity, new floor tile, a tile tub surround, and matched fixtures runs $6,400 to $19,500 installed. The range is wide because the hidden work isn’t visible on a walkthrough: substrate repair, drain corrections, and waterproofing all live behind the finish. Vanity alone installed runs $1,400 to $4,800, and floor tile runs $9 to $22 per square foot. Call (866) 476-6447 for an exact written number on your room; estimates are free.
Can you install tile over my existing tile floor?
Sometimes, but we test for it first rather than assuming. Tile-over-tile works when the existing floor is well bonded, flat, and structurally stiff enough for the added load, and it fails when the original installation is already loose or the subfloor deflects. We check bond, flatness, and deflection before recommending it. In Concord’s older homes we usually end up removing the old floor, because tile set on 1970s plywood rarely passes those checks. Call us and we’ll tell you which situation you have.
Do you handle the plumbing and electrical rough-in, or do I hire someone separately?
We coordinate the rough-in as part of the tile and fixture job, so you’re not scheduling a plumber and an electrician around our crew. Moving a drain for a larger vanity, swapping a valve for a new shower trim, or adding a GFCI outlet near the sink all get sequenced into the same written scope. That coordination is the main reason homeowners hire us for the whole sub-service instead of piecing it out. Call (866) 476-6447 to talk through what your room needs.
What does the 365-Day Done Right Promise actually cover?
It covers the completed work for a full year from job close. If the tile fails, a joint opens, a fixture leaks, or a vanity settles within that window, we return and correct it at no charge. It’s a written guarantee, handed over at close along with the documented scope, not a verbal promise. Materials also carry their manufacturer warranties, which back our coverage. Call (866) 476-6447 and we’ll walk you through the exact terms before you commit to anything.
Get a Written Price for Your Vanities, Tile & Fixtures
If your Concord bathroom needs new tile, a vanity that isn’t swelling at the base, and fixtures that actually shut off clean, we’ll walk the room with you, put a number in writing, and stand behind the finished work for a full year. No countdowns, no pressure, no surprise line items at the door. Call Bradford Remodeling Co Concord at (866) 476-6447 for a free estimate, and a live person will pick up.
Written by the team at Bradford Remodeling Co Concord, serving Concord.


