Last updated November 18, 2026








Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
The Complete Bathroom Remodeling Guide for Concord Homeowners
Here’s the part most national remodeling guides leave out: in Concord, the order of your trades is a permit requirement, not a suggestion. Contra Costa County inspectors want a wet-area inspection before tile goes down, and if that rough inspection gets skipped, you may end up cutting out finished tile to prove your waterproofing was done right. That single sequencing rule is where more Concord bathroom budgets fall apart than any material choice. This guide covers what actually triggers a permit in Concord, the correct trade sequence and why deviation causes re-work, realistic cost ranges by scope tier, water pressure issues in older Concord housing stock, and what The Garrison Standard puts in writing before a single tool comes out.
Quick Answer
A bathroom remodel in Concord typically runs $9,000–$18,000 for a cosmetic refresh, $26,000–$48,000 for a partial remodel, and $58,000–$95,000 for a full gut with a layout change. Permits, waterproofing inspection, and trade sequencing drive more of the final number than tile or fixture selection. Get the scope and price in writing before demo starts, and confirm who pulls the permit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- Which Bathroom Work in Concord Requires a Permit
- The Correct Trade Sequence (and Why It Matters)
- Realistic Cost Ranges by Scope Tier in Concord
- Water Heaters, Pressure, and Shower Performance in Older Concord Homes
- What The Garrison Standard Means for a Bathroom Scope
- Common Mistakes to Avoid
- When to Call a Professional
- Frequently Asked Questions
Which Bathroom Work in Concord Requires a Permit
This is the first question to settle, and the answer depends on whether you’re moving anything that carries water, power, or structural load. Contra Costa County and the City of Concord share jurisdiction depending on your address, so the permit threshold is set by code, not by contractor preference. Cosmetic work generally doesn’t need a permit. Anything that touches the wet or electrical rough-in does.
Usually no permit required (cosmetic)
- Pulling and replacing a vanity without moving the plumbing supply or drain
- Swapping a toilet in the same location with the same rough-in dimensions
- Replacing a showerhead, faucet trim, or a like-for-like light fixture
- New paint, flooring over an intact substrate, or tile replacement in a dry area
- Replacing a mirror or cabinet hardware
Permit required
- Any relocation of supply lines, drains, or the toilet’s rough-in position
- Converting a tub to a curbless or walk-in shower when the drain moves
- New or relocated electrical circuits, outlets near water, or exhaust fan additions
- Removing or altering a load-bearing wall, or adding a window
- Any waterproofing change in a wet area (this one triggers the inspection sequence)
If you’re unsure which side of the line your project sits on, put the question in writing to the contractor before signing. The answer belongs in the scope document, not in a verbal yes at the kitchen table. For broader structural work, that conversation typically overlaps with the role of a General Contractor in Concord.
The Correct Trade Sequence (and Why It Matters)
Sequence violations are the most expensive mistake we see in Concord bathroom projects, and they’re entirely preventable. Each trade depends on the one before it being inspected and signed off. Here’s the order that keeps you out of re-work.
- Demo and site protection. Tear-out, debris removal, and protection of adjacent rooms. Confirm shut-offs work before anything gets wet.
- Rough plumbing. Supply and drain lines set, pressure-tested. If the layout is changing, this is where it happens.
- Rough electrical. Circuits, GFCI protection, exhaust fan wiring, and any in-wall lighting.
- Waterproofing and rough inspection. This is the step that matters most. The wet-area inspection happens here, before cement board and tile. Skip it and you may be cutting out finished tile to prove the waterproofing.
- Cement board and substrate. Installed over the inspected waterproofing, with seams and penetrations handled correctly.
- Tile and finishes. Floor and wall tile set, cured, and grouted. This is where a small curing error becomes a callback.
- Fixtures and trim. Toilet, vanity, shower valve and trim, mirror, lighting, and final caulk. Then a documented walk-through.
Every step that gets skipped and done out of order creates a domino effect. A plumber who comes back after tile to fix a drain rough-in means cutting tile, re-inspecting, and re-tiling. That cost lands on someone, and it’s rarely the contractor who skipped the step.
Realistic Cost Ranges by Scope Tier in Concord
Concord bathroom costs split cleanly into three tiers. The ranges below are what we see across Concord’s housing stock, from the older single-story neighborhoods off Clayton Road to the mid-century homes near downtown. These are budget ranges, not fixed bids, so treat them as the frame for a written quote rather than a floor.
- Cosmetic refresh, $9,000–$18,000. Paint, flooring, vanity and faucet, toilet, mirror, lighting, and tile in a dry area. No plumbing or electrical relocation. No permit required.
- Partial remodel, $26,000–$48,000. Tub or shower replacement, new tile in the wet area, new vanity with the drain in place, new fixtures, exhaust fan addition. Permit and waterproofing inspection included.
- Full gut with layout change, $58,000–$95,000. Studs exposed, plumbing and electrical relocated, new shower or tub, new tile throughout, new cabinetry, improved ventilation. Multiple inspections.
What moves you up a tier
- Moving the toilet’s rough-in (adds plumbing, framing, and inspection)
- Converting a tub to a curbless walk-in shower (adds waterproofing scope and slope work)
- Adding a second sink or moving the vanity wall (adds plumbing and electrical)
- Ventilation upgrades required for moisture control in a tight, older footprint
Get the price for your specific scope in writing before work starts. That’s a rule we don’t bend, and it’s exactly what a Bathroom Remodeling in Concord project should be priced against. If the kitchen is also on the list, that scope belongs in a separate written document, and a Kitchen Remodeling in Concord quote should be prepared the same way.
Water Heaters, Pressure, and Shower Performance in Older Concord Homes
A new shower can disappoint you on day one if the plumbing behind the wall hasn’t kept up. Many Concord homes were built before modern pressure-balancing valves became standard, and some still run on older galvanized supply lines that restrict flow as they age. That doesn’t mean you need to replace everything, but it does mean the plan should address it before tile goes back up.
What to check before you remodel a shower
- Static water pressure at the hose bib. Confirm it’s in a safe range for the new fixture and the home’s older supply lines. High pressure stresses a new valve just as much as low pressure makes it feel weak.
- Water heater capacity and age. A larger shower with multiple body sprays draws more hot water than the old unit was sized for. Confirm the heater can keep up, or plan for it.
- Galvanized supply lines. Visible corrosion at the fittings is a sign the line should be replaced while the wall is open, not after tile is set.
- Pressure-balancing valve condition. A tired valve can make a new shower feel inconsistent. Replace it during the rough-in, not after.
- Drain slope and trap condition. Old floor drains in tight footprints can need adjustment when a shower pan changes.
Handling these while the wall is open is the single biggest cost saver in a Concord bathroom remodel. It’s also the step most national guides skip. When the scope starts crossing into structural framing or whole-home work, that’s the point to bring in a Bradford Remodeling Co Concord home team for a walk-through.
What The Garrison Standard Means for a Bathroom Scope
The Garrison Standard is the framework behind every Bradford Remodeling Co Concord project, and it has a specific meaning in a bathroom scope. It means the written price comes before any work starts, and the scope lands on paper in plain language.
What gets written down
- Every line item: demo, rough plumbing, rough electrical, waterproofing, substrate, tile, fixtures, trim, and final clean
- Who pulls the permit and which inspections are scheduled
- Named materials and brands from our documented roster, including Kohler and Moen fixtures, KraftMaid and Wellborn cabinetry, and Cambria and Caesarstone surfaces where they’re part of the scope
- The written guarantee terms, in plain language, before signing
What the 365-Day Done Right Promise covers
Every completed bathroom project carries a full-year written guarantee. If the work fails inside that window, we return and correct it at no charge. That covers the things that actually fail: a tile that lifts, a fixture that leaks at the connection, a shower valve that won’t hold temperature. It’s in writing, and it doesn’t expire when the crew leaves.
What “done” means on paper
Clean site, every debris item removed, documented scope matched to what got installed, and a signed written guarantee in your hand. Background-checked, uniformed technicians handle the install, so you know who’s walking through the door before they arrive. A live person answers the phone at (866) 476-6447 around the clock, not a voicemail system.
See the difference
Before
After
Before
After
Before
AfterCommon Mistakes to Avoid

- Skipping the wet-area inspection to save a week. It feels like a shortcut until the inspector wants to see the waterproofing and the tile is already set. Cutting it out adds weeks, not days.
- Setting tile over an unrepaired substrate. Soggy cement board or a soft floor will fail under new tile, and the failure shows up within months. Fix the substrate before tile goes down, every time.
- Choosing fixtures before confirming water pressure. A fancy valve on low-pressure galvanized supply lines is a disappointing shower in an expensive bathroom. Test pressure first.
- Letting the plumber and tile setter work out the sequence on the job site. That’s how re-work happens. The sequence belongs in the written scope.
- Assuming a cosmetic refresh doesn’t need a licensed plumber. The moment a supply line is touched, the rules change. Confirm who’s doing the work before accepting a verbal yes.
- Moving a drain to save a step without the permit. County inspectors find this during resale or a later inspection, and the fix is expensive. Do it right the first time.
- Forgetting ventilation. A Concord bathroom without a properly sized exhaust fan develops moisture problems that will cost more to fix than the fan did to install.
When to Call a Professional
Some bathroom work is genuinely DIY-friendly: a faucet swap, a fresh coat of paint, new hardware. Anything involving the rough plumbing, rough electrical, waterproofing, or a permit should go to a licensed professional. That’s not a sales line; it’s the line where homeowner error creates a safety or code problem. A failed waterproofing job doesn’t just cost money, it creates a moisture issue behind a wall that you can’t see until it’s done damage. Same goes for anything touching an electrical panel or gas line.
Bradford Remodeling Co Concord offers free estimates in Concord. We’ll walk the bathroom, confirm which work triggers a permit, and give you a written price before anything starts. Call (866) 476-6447 to schedule your free estimate.
Frequently Asked Questions
Yes, if the work involves moving supply lines or drains, changing the toilet’s rough-in, adding or relocating electrical circuits, altering a load-bearing wall, or changing waterproofing in a wet area. Cosmetic work like paint, flooring over an intact substrate, and like-for-like fixture swaps generally doesn’t require a permit. Confirm the specific scope in writing with your contractor before signing.
A cosmetic refresh typically runs $9,000–$18,000, a partial remodel with a new shower or tub runs $26,000–$48,000, and a full gut with layout change runs $58,000–$95,000. The biggest cost drivers are whether the layout changes and whether the plumbing and electrical get relocated. Call (866) 476-6447 for an exact quote - estimates are free.
A wet-area inspection is the county’s check that waterproofing is installed correctly before tile goes down. In Concord, skipping it can mean cutting out finished tile to prove the waterproofing was done right. It’s the single most important step in the trade sequence, and it’s preventable.
A cosmetic refresh typically takes one to two weeks, a partial remodel runs three to five weeks, and a full gut with layout change typically runs six to ten weeks. Permit and inspection scheduling can add days to the timeline. Get the schedule in writing with the scope so you know what to plan around.
It shouldn’t if the scope is written correctly. We put a written price in place before any work starts, and change orders only happen when you approve a scope change. If something hidden turns up behind the wall (old galvanized lines, soft substrate), we document it and get your approval before proceeding. That’s part of The Garrison Standard.
Every completed bathroom project carries a full-year written guarantee. If the work fails inside that window, we return and correct it at no charge. That covers tile lifting, fixture leaks at the connection, and shower valve issues. The guarantee terms are in writing before the project begins, so there’s no ambiguity about what’s covered.
The Bottom Line

Concord bathroom remodels go sideways for a predictable set of reasons: skipped wet-area inspections, out-of-sequence trades, unchecked water pressure, and verbal scope. None of those are material choices; all of them are process choices, and process is fixable before demo starts. Know which work triggers a permit, get the trade sequence written into the scope, confirm pressure and water heater capacity while the wall is open, and hold onto a written price and a written guarantee. That’s what a squared-away bathroom project looks like. Bradford Remodeling Co Concord runs every bathroom on The Garrison Standard: written price, documented scope, live-person phone coverage, and the 365-Day Done Right Promise. Call (866) 476-6447 for your free estimate.
Written by the team at Bradford Remodeling Co Concord.


